Demon Killer Sniper RDA VS Demon Killer Magic Hat RTA Review

Demon Killer Sniper RDA and Demon Killer Magic Hat RTA are both released by Demon Killer. So let's see the difference between them!

Demon Killer Sniper RDA

The Dripka Sniper RDA appeared on many vape shop online on August 14th. The device is designed in metal and black. A threaded topkope is fitted with a hole for the 800th Ultem plastic dropper. A notable feature of the device is the rotating ring in the center of the dome, which can be adjusted for tightening. As a decoration, the sniper cross was carved. Blowing is provided by two sets of eight small holes.

At the center, the deck is divided into rows of tolerant trays. The legs of the two spirals are positioned at an angle and are pressed in a similar plane by hex screws. This installation contributes to the special shape of the frame surface, just like the roof of a house. A groove for fixing the dome is provided on the wall of the base. 

Demon Killer Sniper RDA Parameters:

• Size: 24.8 x 34mm
• Material: SUS304 and PEI
• Thread: 510 Pin

Demon Killer Sniper RDA comes with:

• Sniper RDA*1
• BF Pin*1
• 510 Drip Tip Adapter*1
• 510 connector*1
• Screwdriver*1
• Coils*4
• Screws*4
• O-rings*6

Demon Killer Magic Hat RTA

Demon Killer Magic Hat RTA comes with two different capacities. On August 14th, a new device appeared in the online store - Magic Hat. Because the design was very unusual, the developers decided to assign their devices to other devices. The tank at our vape shop is topped with a plastic cap in the shape of a cowboy hat, available in black, red and green. The walls of the base are filled with a rough surface and three air openings are perforated on both sides.Obviously, the ability to adjust the fastening device does not increase. The maintenance tank is equipped with a replaceable evaporator with two 0.5 ohm spirals and an alternative with a resistance of 0.15 ohms. The recommended power value is 50 watts. The tank has a volume of 4.5 or 5 ml depending on the capacity selected.

Demon Killer Magic Hat RTA Parameters:

• Height - 42 mm
• Diameter - 24 mm
• Resistance: 0.5 / 0.15 Ohm
• Capacity: 5.0ml(0.5ohm coil) / 4.5ml(0.15ohm mesh coil)

Demon Killer Magic Hat RTA comes with:

• Magic Hat RTA*1
• 0.5ohm coil*1
• 0.15ohm mesh coil*1
• User Manual*1

>>You may also interest:
buy suorin drop kit
buy brain freeze e-juice

>>Previous Article:
XOMO BOX MODS REVIEW-XOMO EXO ARMOR MOD VS XOMO GT LASER MOD